33
© 2013 Directed. All rights reserved.
Feature Details
33
7. The engine turns off and after a few seconds, the
REMOTE START OFF
message plays to confirm. If the door is opened in Step 3 then
the engine continues to run.
Turbo Timer Mode
The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1. With the engine running,
set
the parking brake.
2. Within
20
seconds,
press
the optional dash mounted activation
button or perform the Timer Mode command.
3. The parking lights turn on and the remote start activates the igni-
tion outputs. The
REMOTE START ON
text and beeps play to confirm.
4.
Turn
Off and
remove
the key from the ignition switch, the engine
remains running.
5.
Exit
the vehicle,
close
all the doors and
Lock
the system.
6. The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
For Turbo Timer mode on manual transmission vehicles fol-
low the directions in the
Manual Transmission Start
(MTS
mode) section with the door open and in step 3 send the
Timer Mode command from the remote control.
Remote Start Error
For user safety, the system must be properly configured or remote start
will not activate. If the remote start fails to active, refer to the follow-
ing table for the screens and parking light flashes that will identify the
configuration issue and resolution.
All manuals and user guides at all-guides.com
all-guides.com
