background image

7

© 2008 Directed Electronics. All rights reserved.

Warning! Safety first

The following safety warnings must be observed at all times:

$UE TO THE COMPLEXITY OF THIS SYSTEM INSTALLATION OF THIS PRODUCT MUST ONLY BE

performed by an authorized Directed dealer.

When properly installed, this system can start the vehicle via a command signal 
from the remote control transmitter. Therefore, never operate the system in an 
enclosed area or partially enclosed area without ventilation (such as a garage). 
When parking in an enclosed or partially enclosed area or when having the 
vehicle serviced, the remote start system must be disabled using the installed 
toggle switch. It is the user’s sole responsibility to properly handle and keep out 
of reach from children all remote control transmitters to assure that the system 
does not unintentionally remote start the vehicle. THE USER MUST INSTALL A 

#!2"/.-/./8)$%$%4%#4/2)./2!"/544(%,)6).'!2%!!$*!

-

#%.4 4/ 4(% 6%()#,% !,, $//23 ,%!$).' &2/- !$*!#%.4 ,)6).'
!2%!3 4/ 4(% %.#,/3%$ /2 0!24)!,,9 %.#,/3%$ 6%()#,% 34/2!'%

AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole 
responsibility of the user.

Remote starters on manual transmission vehicles operate differently than those 
with automatic transmission 

because you must leave your car in neutral. You 

MUSTREADTHIS/WNERS'UIDETOFAMILIARIZEYOURSELFWITHTHEPROPERPROCEDURES

regarding manual transmission remote starters. If you have any questions, ask 
your installer or contact Directed at 1-800-753-0600.

Before remote starting a manual transmission vehicle, be sure to:

Leave the vehicle in neutral and be sure no one is standing in front or 

s

behind the vehicle.
Only remote start on a flat surface

s

Have the parking brake fully engaged

s

Содержание Responder LC 50.7X





























































Отзывы: