How to remotely lock/unlock the doors
To lock all the vehicle doors, press button 1 once. All the following will occur:
•
The doors will lock.
•
As confirmation from a distance, you will see two flashes of the vehicle’s
parking lights.
•
The LED on the system’s PlainView switch will flash repeatedly.
To unlock the doors, press button 1 again:
•
The doors will unlock.
•
You will see one flash of the vehicle’s parking lights.
•
The PlainView switch LED will turn off.
•
The interior courtesy light(s) will turn on an stay on for 30 seconds or until
you turn on the ignition and press the brake, whichever occurs first.
How to remotely start/shutdown the engine
WARNING: Always exercise caution and common sense when using the Smart
Remote Starter III. Never remotely start the engine or engage one or both AutoStart
features when the vehicle is parked in an enclosed area without adequate
ventilation.
WARNING: Never allow children to play with the remote control.
Whenever you remotely start the engine, the Smart Remote Starter III rapidly makes
a series of safety checks before attempting to crank the starter motor. It will:
•
Verify that the engine or ignition switch is not already on.
•
Verify that the transmission is in the PARK position.
•
Verify that the engine is not overheated.
•
Verify that no one is in the vehicle pressing the brake pedal.
•
Verify that the hood is closed.
To remotely start the engine, press button 2. All of the following will occur:
•
You will see two flashes of the vehicle’s parking lights to confirm that the
startup process has been initiated. (NOTE: Four flashes indicate a fault
condition, e.g., the hood is open).
•
The engine and all preset accessories (air conditioner, heater, defroster,
etc.) will start and run.
•
While the engine idles, the parking lights will be illuminated for on-going
visual confirmation.
When the engine is running under the control of your Smart Remote Starter III, you may, if
you wish, shut down the engine by again pressing button 2.
7
