Enhanced AutoArming™
If this feature is enabled and you forget to remotely arm, the system will automatically
arm itself 30 seconds after the vehicle doors are closed. For your convenience, if you
re-open any door(s) within the 30-second countdown, AutoArming will restart from the
beginning once all doors are closed. Concept 60 has these additional AutoArming features:
AutoArming enable/disable:
If you prefer, you may deactivate or reactivate the
AutoArming feature. See User-selectable features on pages 21-25.
Visual acknowledgment:
Five seconds after you exit the vehicle and close all the
doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
AutoArm & Lock:
To ensure you can’t accidentally lock your keys inside the car,
the system is factory-set not to lock the doors upon AutoArming. To change this
setting, see User-selectable features on pages 21-25.
User-selectable entry delay:
If you temporarily lose the use of your remote
controls, you may turn on the 15-second entry delay feature. This allows you to
enter the car and silently disarm the system by turning on the ignition within 15
seconds of opening the door. See User-selectable features on pages 21-25.
Instant AutoArming bypass:
Prevents AutoArming when fueling the vehicle and
other times when you wish to temporarily bypass AutoArming. To activate Instant
AutoArming Bypass, rapidly turn the ignition switch to “ON” then “OFF.” You
will hear a single siren chirp to confirm that the system will not AutoArm. The
system reverts to its normal operating mode when you next start the engine.
UltraSecure™ valet mode
In seconds, thieves can disable other alarm brands by hotwiring the ignition and flicking
an easy-to-find “hidden” valet switch. Your Concept 60 has safeguards that absolutely
ensure that a thief cannot enable the valet mode as a way of “turning off” your system.
How? To enable valet mode, the driver must first enter the secret disarming code on the
PlainView switch (i.e., the same code you use to turn off the BlackJax anti-carjacking
circuitry; see pages 9-10). Whenever the system is put in valet mode, it overrides the
anti-carjacking features and the AutoArming feature (see above), as well as all other
security features. At various times, you will need to switch the system off. For instance,
when having your car serviced, washed or parked by a valet.
Remember: When your car will be driven by someone else (such as a mechanic) who
will not know your disarming code, you must place the system in valet mode, otherwise
your car will be immobilized.
NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.
To enable valet mode
1. Turn the ignition switch to its “ON” position or start the engine.
2. Enter your secret disarming code (as noted on page 9) on the PlainView switch, then
return the switch to its center position.
3. You now have 5 seconds to press latched position to enter valet mode. The system’s
LED will glow continually for on-going visual confirmation of valet mode.
15
