How to interpret the chirps and indicator light flashes
When you use the remote, the system responds with chirps and indicator light flashes:
Chirps and flashes
Meaning
1
Your system is disarmed
2
Your system is armed
2 and then 4
Armed but there is a door open or the sensor is malfunctioning
(see Smart AutoTesting on page 13)
3
Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 8)
4
Armed but the hood or trunk is ajar (see Smart AutoTesting on page 13)
How to interpret the LED status indicator
The LED on your car’s dashboard or console will inform you of the system status:
LED Condition
Meaning
Off
System is disarmed and in normal operating mode
On
Programming or valet mode.
Flashing
The AutoImmobilizer is engaged and/or the system is armed and protecting your vehicle
Pause between flashes
Either a malfunction (see page 13) or an intrusion was attempted (see page 8)
AutoArming
If this feature is enabled and you forget to remotely arm, the system will automatically
arm itself 30 seconds after you park the vehicle, exit, and close all the vehicle doors. For
your convenience, if you re-open any door(s) within the 30-second countdown,
AutoArming will restart from the beginning once all doors are closed. Concept 50x
has these additional AutoArming features:
AutoArming enable/disable:
If you prefer, you may deactivate or reactivate
the AutoArming feature. See User-selectable features on pages 16-20.
Visual acknowledgment:
Five seconds after you exit the vehicle and close all
the doors, the indicator lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
AutoArm & Lock:
To ensure you can’t accidentally lock your keys inside the
car, the system is factory-set not to lock the doors upon AutoArming. To
change this setting, see User-selectable features on pages 16-20.
Instant AutoArming bypass:
Prevents AutoArming when fueling the vehicle
and other times when you wish to temporarily bypass AutoArming. To
activate Instant AutoArming Bypass, rapidly turn the ignition switch to “ON”
then “OFF.” You will hear a single siren chirp to confirm that the system will
not AutoArm. The system reverts to its normal operating mode when you next
start the engine.
9
