3
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Important Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Make sure you understand all instructions
and warnings. Keep the manual in a safe place for future reference, along with any
warranty information, your purchase receipt and the original carton.
Always follow basic safety precautions and accident prevention measures when using
an electrical appliance, including the following:
• Make sure your outlet voltage and
circuit frequency correspond to the
voltage stated on the appliance rating
label.
• To protect against fire and electric
shock, do not immerse the cord,
plug or fan in water or other liquid,
or expose the electrical connections
to water. Ensure your hands are dry
before handling the plug or switching
on the fan. Do not use the fan
outdoors or on wet surfaces. Protect
it from liquid spills.
• Check the power cord regularly
for visible damage. If the cord is
damaged, it must be replaced by the
manufacturer, its authorised service
centres or appropriately qualified
personnel in order to avoid any
hazards.
• WARNING! Do not pick up or operate
the fan if the supply cord, plug
or housing is damaged, or after it
malfunctions or has been dropped or
damaged in any manner. If damaged,
contact our after sales support centre
for advice.
• Protect the power cord:
-
Do not operate the fan with the cord
coiled up; always fully unwind.
-
Do not twist or kink the cord or let it
touch heated surfaces.
-
Do not put any stress on the cord
where it connects to the product.
-
Never carry the fan by the cord.
-
Arrange the cord away from any
traffic area so no one will trip over it.
-
Do not run the cord under carpeting
or cover it with rugs or runners.
• WARNING! No extension cord, no
timer: Do not use this fan with an
extension cord, plug adaptor, external
timer or separate speed control
device.
• To insert the plug, grasp it firmly and
guide it into outlet.
• Do not use the main power switch
and the On/Off switch as the sole
means for disconnecting power.
Always unplug the fan from the
power outlet when it is not in use and
before cleaning, servicing, moving or
storing the appliance. Grip the plug
and remove it from the outlet, do not
pull the cord when disconnecting at
the mains.
• Unless your home is already fitted
with a residual current device (safety
switch), we recommend installing an
RCD with a rated residual operating
current not exceeding 30mA to
provide additional safety protection
when using electrical appliances.
See your electrician for professional
advice.
• The use of accessory attachments not
recommended in this manual may
cause injury or hazards.