background image

AFTER SALES SUPPORT

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

3

Important Safety Instructions

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 

Read this manual thoroughly before first use, even if you are familiar with this type of 
product. The safety precautions enclosed herein reduce the risk of fire, electric shock 
and injury when correctly adhered to. Make sure you understand all instructions and 
warnings. Keep the manual in a safe place for future reference, along with any warranty 
information, your purchase receipt and the packaging carton. If you sell or transfer 
ownership of this product, please pass on these instructions to the new owner. 

Always 

follow basic safety precautions and accident prevention measures when using an 
electrical appliance, including the following:

 

Electrical safety and cord handling

•     Voltage: 

Make sure your outlet voltage and circuit frequency correspond to the 

voltage stated on the rating label. If this is not the case, do not use the fan.

•     Water

: To protect against fire and electric shock, do not immerse the cord, plug 

or the fan in water or other liquid, or expose the electrical connections to water. 
Ensure your hands are dry before handling the plug or switching on the fan. Do 
not use the fan outdoors or on wet surfaces. Protect it from liquid spills. 

•     Damage

: Check the power cord regularly for visible damage. If the cord is 

damaged, it must be replaced by the manufacturer, its authorised service centres 
or appropriately qualified personnel in order to avoid any hazards.

•    

WARNING! 

Do not pick up or operate the appliance if the supply cord, plug or 

housing is damaged, or after it malfunctions or has been dropped or damaged in 
any manner.

 

In case of damage, contact

 

our after sales support centre.

•    Protect the power cord: 

 

- Do not operate the fan with the cord coiled up; always fully unwind.

 

- Do not twist or kink the cord or let it touch heated surfaces.

 

- Do not put any stress on the cord where it connects to the product.

 

- Never carry the fan by the cord.

 

- Arrange the cord away from any traffic area so no one will trip over it.

 

- Do not run the cord under carpeting or cover it with rugs or runners.

•    

WARNING! 

No extension cord, no timer: 

Do not use this fan with an extension 

cord, plug adaptor, external timer or separate speed control device.

•     Connection: 

To insert the plug, grasp it firmly and guide it into outlet. 

•     Disconnection:

 Unplug the appliance from the power outlet when it is not in use 

and before cleaning, servicing, moving or storing the appliance. Grasp the plug 
and remove it from the outlet, do not pull the cord when disconnecting.

•    Guard removal: 

Ensure that the fan is switched off from the supply mains before 

removing the guard (grille).

•    

WARNING!

 Do not leave unattended during use! 

Always switch it off and unplug 

when not in use, if left unattended, and before cleaning and storing.

Содержание FT-30MD













Отзывы: