Thank you for selecting a Click Exhaust Fan. Please read all instructions thoroughly before com-
mencing installation.
Important: This Exhaust Fan must be installed to comply with the appropriate local council
building regulations, and the Australian and New Zealand wiring rules AS/NZS 3000 latest
edition thereof.
A LICENSED ELECTRICIAN IS REQUIRED TO INSTALL THIS UNIT TO THE MAIN SUPPLY.
CAUTION: The unit must not be installed directly above the shower or bath recesses or en-
closures. The unit must not be installed in a position where water may splash onto the unit.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARNING!: To reduce risk of fire, electrical shock or injury to persons or property:
1. Always operate the product from a power source of the same voltage, frequency and rating as
indicated on the product identification plate.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
3. Do not operate any product with a damaged cord or plug, or after the product malfunctions,
or is dropped or appears damaged in any way.
4. This unit is designed for indoor use only.
5. Do not allow any foreign object to enter the grille openings as this may damage the unit and/or
harm the user.
6. Do not allow any ceiling insulation to cover any portion of the rear of the appliance.
7. Use this unit only as described in this manual. Any other use not recommended by the manufac-
turer may cause fire, electric shock, or injury to persons. If you have questions, contact the manu
-
facturer.
8. All wiring must be carried out by a licensed Electrician in accordance with all applicable National
/ Local codes and standards. Also check with the local council regulations regarding installation of
exhaust fans.
9. Make sure that the power is OFF before installation.
10. When cutting into the wall, do not damage electrical wiring and other hidden utilities.
11. The unit must be properly grounded, via a socket outlet with earthing facility.
12. For the purpose of avoiding any dangerous gas leaking into your bathroom, the ducting of the
unit must not be laid together with the ducting of air fuelled water heater or other open – fire appli
-
ances into the same flue.
13. The unit must be isolated from the power by means of a plug or all-pole disconnection switch
with a contact separation of at least 3mm in each pole.
14. The power cable must be rated to a minimum 10A load.
PLEASE KEEP THIS INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE
REFERENCE
