14
OPERATION (Cont.)
-
Child Mode
: Fan will auto. Set up timer at 3 hours, oscillation function
will start. And it will work at high speed for 15 minutes, transfer to medium
speed for 15 minutes, then transfer to low speed until it take off. You can take
off oscillation function by manual. The LED Display will turn off if you don’t
control the fan in 30 seconds, touch any button to turn on the display.
5.
TIMER
: The fan is equipped with a timer that allows you to set it’s
length of operation from 1 hour to 12 hours. The LED Display will turn off if you
don’t control the fan in 30 seconds, touch any button to turn on the display.
6.
OSC
: Pressing the ‘
OSC
’ button will start and stop the oscillation
function. The symbol is displayed on the LED panel.
7.
COOLING
: Press ‘
COOLING
’ button to turn on the cold air function.
Press button again to turn off. If you want to operate the unit with water for
better cooling, open the water tank cover and fill it up to the MAX mark at the
most. Take care when doing so, to make sure, that no water enters the
product, e.g. through the air inlet.
ATTENTION ABOUT ICE BOX
When putting the ice box in the water tank (the ice box needs to be frozen for
more than 3 hours), and the cooling effect will improve
DO NOT USE COOLING MODE WITHOUT WATER. THIS CAN POTENTIALLY
DAMAGE THE UNIT.
8.
DISPLAY
: Can be switched off temporarily by press the LED button on
the remote or by long pressing the SPEED button on the control panel for
more than 3 seconds, the display will light up again once any control button
is activated.