AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
7
Operating Instructions
Using the fan
• Clip the fan to the base (Fig. 1) and place it on a firm, flat surface for
desktop operation. Alternatively, clip it to the edge of your desk or table
using the clip (Fig. 3).
• Plug the fan into an appropriate power outlet and switch on power to
the outlet.
• Move the speed control to select the desired speed (Fig. 4):
0 .......Off
1 .......Low
2 .......High
• Loosen the tilt angle adjustment knob to tilt the fan vertically (Fig. 5),
then tighten the knob again securely.
• The rotary pillar may be manually adjusted 360 degrees to direct the
airflow horizontally into all directions. (Fig. 6).
(Fig. 5)
(Fig. 4)
(Fig. 6)
