INSTALLATION AND OPERATING INSTRUCTIONS
1
SAFETY PRECAUTIONS
Read all instructions carefully.
• All components need to be installed in accordance with the user
manual instructions for correct performance of unit.
• This appliance should be used in conjunction with a safety switch.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or has been damaged in any manner.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Children should be supervised to ensure that they do not play with
the appliance.
• Do not use appliance for other than intended use.
• Do not disassemble, repair or re-form the unit, it may cause injury,
fire or other malfunctions. A qualified service agent must make all
service adjustments. Removing any part or attempting to service
the dryer will void the warranty.
• Unplug from outlet when not in use and before cleaning. Never
plug in or unplug unit with wet hands.
• Do not use unit outdoors or expose to greasy or damp
environments.
• Keep the rear air inlet and outlet is free from air blocking
materials such as clothing, plastic bags or papers. Air flow is
required for the unit to operate effectively.
• Place unit on a flat location at least 30cm from wall or other
appliances.
• Unit must be placed on a stable flat surface to reduce possible
excessive vibration and noise.
• Keep the dryer away from fire, flammable gas, combustible
products or vapours, and corrosive substances.
• Do not wash or reuse the filters.
• Do not operate the unit without filters.
• To protect against fire, electric shock and personal injury, do not
immerse cord, plugs, or appliance in water or other liquid.
• Do not place on or near a hot gas, electric burner or heating
appliance.
• Check voltage to be sure that the voltage indicated on the
nameplate agrees with your voltage.
Air Purifier
Model Code
CLI-AP20
Product Dimensions
H394 x W310 x D139mm
Coverage area
Up to 20m
2
Power consumption
35 watts
Net weight / Gross Weight
3.5 kg / 4.2 kg
Air Change/ Hr
30m2 x 4.5
Air Flow /Hr
133m
2
Clean air Delivery rate
75cbm (smoke)
Power cord length
1.8m
Noise level in Turbo Mode
58dB
Noise level in Sleep Mode
28dB
Replacement Filter
CLI-RF-AP20
