
Physical installation
Warning! The fixture must be either fastened to a flat surface such as a stage or wall, or clamped to a truss or
similar structure in any orientation using a rigging clamp.
Warning! Always attach an approved safety cable to one of the safety cable attachment points on the base.
Do not illuminate surfaces within 1 meters of the fixture. Ensure that flammable materials (wood, fabric, paper, etc.) are
minimum 1 meters from the fixture and allow a free airflow around the fixture.
Fastening the fixture to a flat surface
The fixture can be fastened to a fixed flat surface that is oriented at any angle. Check that the surface can
support at least 10 times the weight of all fixtures and equipment to be installed.
Warning! The supporting surface must be hard and flat or cooling may be blocked, which will cause overheating.
Fasten the fixture securely. Do not place it on unstable surfaces. Always attach a securely anchored safety cable to the
safety cable attachment point.
Block access under the construction area. Work from a stable platform, hang the fixture on a truss with the
arrow on the base towards the area to be illuminated. Tighten the rigging clamp.
Содержание POSEIDON Wash XL
