Clevo X7200, Руководство по обслуживанию

Страница: 35 / 116

Disassembly
Removing and Installing the Video Card 2 - 11
2.Disassembly
Installing a New Video Card
1. Prepare to fit the video cards
&
into the slot by holding it at about a 30° angle ( page 2 - 10 ).
2. The card needs to be fully into the slot, and the video card and socket have a guide-key and pin which align to
allow the card to fit securely (
Figure 7
h )
.
3.
Fit the connectors firmly into the socket, straight and evenly (
Figure 7
h ).
4. DO NOT attempt to push one end of the card in ahead of the other.
5. The card’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the socket
as it will go (none of the gold colored contact should be showing). DO NOT FORCE the card; it should fit without
much pressure.
6.
Secure the card with screws
- ( Figure 5 on page 2 - 9 ).
7. Place the heat sink back on the card, and secure the screws in the order indicated in Figure 5 on page 2 - 9 .
8. Attach the video card fan and secure with the screws as indicated in Figure 5 on page 2 - 9 .
9.
Reinsert the component bay cover, and secure with the screws as indicated in
Figure 14 on page 2 - 18 .
Figure 7
Installing a New
Video Card
g. Insert the video cards
at a 30 degree angle.
h. Fit the connectors
straight and even.
29 30
g. h.
25 28

Caution
The heat sink, and video
card area in general,
contains parts which are
subject to high tempera-
tures. Allow the area
time to cool before re-
moving these parts.