Clevo W970SUW, Руководство по обслуживанию

Страница: 38 / 104

Disassembly
2 - 14 Removing and Installing a Processor
2.Disassembly
Processor Installation Procedure
1. Insert the CPU ( Figure 10a ), pay careful attention to the pin alignment, it will fit only one way (DO NOT
FORCE IT!), and turn the release latch towards the lock symbol ( Figure 10b ).
2. Remove the sticker ( Figure 10c ) from the heat sink unit.
3. Insert the heat sink as indicated in Figure 10c .
4. Tighten the CPU heat sink screws in the order , & (the order as indicated on the label and Figure 10d ).
5. Replace the CPU fan, component bay cover and tighten the screws ( page 2 - 12 ).
A
B
C
D
1 2 3
b.
B
a.
D
Note :
Tighten the screws in the order as
indicated on the label.
A
c.
d.
1
2
3
C
D
Figure 10
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Insert the heat sink.
d. Tighten the screws.

A. CPU
D. Heat Sink
• 3 Screws