Clevo W830T, Руководство пользователя

Страница: 146 / 172

Troubleshooting
8 - 10 Problems and Possible Solutions
8
The system freezes or the screen goes
dark.
The system’s power saving features have timed-out . Use the AC/DC adapter,
press the sleep ( Fn + F4 ) key combination, or press the power button if no LEDs
are lit.
The system never goes into a power
saving mode .
Power Options features are not enabled. Go to the Windows Power Options
menu and enable the features you prefer (see “Power-Saving States” on
page 3 - 6 ). Make sure you have enabled Hibernate mode from the control
panel.
The Wireless LAN/Bluetooth/3.75G
modules cannot be detected.
The modules are off. Check the LED indicator and/or function key
indicator to see if the WLAN/Bluetooth/3.75G module is on or off (see “System
Map: LCD Panel Open - Models C & D” on page 1 - 9 ). If the LED indicator is
off, then press the Fn + F11 (WLAN) , Fn + F12 (Bluetooth) or Fn + (3.75G)
key combination(s) in order to enable the modules (see “Function Keys &
Visual Indicators” on page 1 - 12 ).
The PC Camera module cannot be
detected.
The module is off. Press the Fn + F10 key combination in order to enable the
module (see “Function Keys & Visual Indicators” on page 1 - 12 ). Run the
BisonCap program to view the camera picture.
The Wireless LAN/Bluetooth/ PC
Camera/3.75G modules cannot be
configured.
The driver(s) for the module(s) have not been installed. Make sure you have
installed the driver for the appropriate module (see the instructions for the
appropriate module in
“Modules & Options” on page 7 - 1 ).
Problem Possible Cause - Solution