Clevo W241EUQ, Руководство по обслуживанию

Страница: 39 / 107

Disassembly
Removing the Keyboard 2 - 15
2.Disassembly
Removing the Keyboard
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Remove screws
-
from the bottom of the computer. Press at points to unsnap the LED cover module
(you may need to use the Eject Pin Tool to do this ( Figure 11a ).
3. Remove the LED cover module and screws - from the keyboard ( Figure 11b ).
4. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable . Disconnect the keyboard
ribbon cable from the locking collar socket ( Figure 11c )
5. Carefully lift up the keyboard ( Figure 11d ) off the computer.
Figure 11
Keyboard Removal
a. Remove screws from the
bottom of the computer.
Press at points
to un-
snap the LED cover
module.
b. Remove the LED cover
module and screws
from the keyboard.
c. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
d. Remove the keyboard.
5
1 4 5
6
6
7 11
12
12 13
14

Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs at
the bottom ( Figure 11c )
at the bottom of the key-
board with the slots in the
case.
a.
Keyboard Tabs
1
3 2
4
7
5
c.
b. d.
8
9
14
10 11
12
6
5
13

6. LED Cover Module
14. Keyboard
• 9 Screws