Clevo W170HN, Руководство по обслуживанию

Страница: 36 / 100

Disassembly
Removing and Installing a Processor 2 - 13
2.Disassembly
Processor Installation Procedure
1. Insert the CPU ( Figure 9a ), pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE
IT!), and turn the release latch towards the lock symbol ( Figure 9b ).
2. Remove the sticker ( Figure 9c ) from the heat sink.
3. Insert the heat sink as indicated in Figure 9d .
4. Tighten the CPU heat sink screws in the order , & (the order as indicated on the label and Figure 9d ).
5. Replace the component bay cover (don’t forget to replace the fan cable) and tighten the screws ( page 2 - 9 ).
A
B
C
D
1 2 3
b.
B
a.
D
1
3
2
Note :
Tighten the screws
in the order as indi-
cated on the label.
C
A
c.
d.
lock
Figure 9
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink and insert
the heat sink.
d. Tighten the screws.

A. CPU
D. Heat Sink
• 3 Screws