Clevo NP50HP, Руководство по обслуживанию

Страница: 35 / 114

Disassembly
Removing the Wireless LAN Module 2 - 11
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, turn it over, remove the battery ( page 2 - 5 ).
2. The Wireless LAN module will be visible at point on the mainboard ( Figure 5a ).
3. Carefully disconnect the cables & , and then remove the screw ( Figure 5b )
4. The Wireless LAN module ( Figure 5c ) will pop-up, and you can remove it from the computer.
1
2 3 4
5
b.
c. a.
5
1
5
2
3
4

5.Wireless LAN Module
• 1 Screw
Figure 5
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (
Figure 5b ).