Clevo N850EJ1, Руководство по обслуживанию

Страница: 38 / 114

Disassembly
2 - 14 Removing the CCD
2.Disassembly
Removing the CCD
1. Turn off the computer, turn it over to remove the battery ( page 2 - 5 ).
2. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Carefully remove the
rubber covers
- and screws - .
3. Run your fingers around the inner frame of the LCD panel to lift at the upper point as indicated by the arrows.
Lift the outer frame at the middle points - as indicated by the arrows, and then run your fingers around the
inner frame at the lower point as indicated by the arrows ( Figure 9a ).
4. Remove the LCD front cover ( Figure 9b ).
1 2 3 4
5
6 7
8
9
b.
a.
6
2 1
5
9
7
8
4
3

9. LCD Front Cover
• 2 Screws
Figure 9
CCD Removal
a. Remove rubber and
screws. Then carefully
release the inner frame
of the LCD panel at the
points indicated by the
arrows.
b. Remove the LCD front
cover.