Clevo N170RD1, Руководство по обслуживанию

Страница: 33 / 122

Disassembly
Removing the Hard Disk Drive 2 - 9
2.Disassembly
4. Lift the hard disk assembly out of the bay ( Figure 5c ).
5. Remove screws - and separate the hard disk from the bracket and mylar cover ( Figure 5d
)
.
6. Reverse the process to install a new hard disk (do not forget to insert the mylar cover between the bracket and
hard disk as shown before replacing the screws).
7 8
9 11
12 13 14
c.
28
12
9
10
11
14
13

Installing 9.5mm or 7mm HDD
Note that the hard disks pictured on
these pages are all 9.5mm(h) hard disk
drive.
In some cases, a 7.0mm(h) hard disk
drive will be installed. Do pay attention
on the alignment of the hard disk and
bracket when tightening the screws.
For more information, contact your dis-
tributor/supplier, and bear in mind your
warranty terms.
25
d.

HDD System Warning
New HDD’s are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your oper-
ating system and programs.
If you have access to the internet, download the latest application
and hardware driver updates for the operating system you plan to in-
stall. Copy these to a removable medium.
7
8

7. HDD Assembly
12. HDD
13. Bracket
14. Mylar Cover
• 3 Screws
Figure 5
HDD Assembly
Removal (cont’d.)
c. Lift the HDD assembly
out of the bay.
d. Separate the HDD, my-
lar cover and bracket.