Disassembly
Removing the System Memory 2 - 7
2.Disassembly
Removing the System Memory
1. Remove the LCD back cover (
page 2 - 6
).
2. The memory sockets will be visible at point
on the mainboard.
3. For each module you want to replace, gently pull the latches
and
toward the sides of the socket to release the
module.
4. Pull the latches to release the second module if necessary.
5. The module
will pop-up, and you can remove it.
6. Insert a new module and fit the connectors firmly into the memory slot.
7. Reverse the procedures to put the computer back together, and do not forget all the screws. When you restart the
computer the new memory configuration should be registered.
8. If the system doesn’t properly detect the new memory,
and you are sure they are properly “seated”
, you may
need to run the
Setup
utility.
Figure 2 - 3
Memory Removal
Sequence
a. Locate the memory
sockets.
b. Pull the latch(es) on
the memory sockets to
release the module(s)
and lift it (them) out.
c. Insert a new module.
4. Memory module(s)
1
2
3
4
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perfor-
mance.
c.
a.
2
b.
3
4
1
All manuals and user guides at all-guides.com
