Clevo A110EU, Краткое руководство пользователя

Страница: 23 / 145

18
English
Chipset
1. Click 1.Install Chipset Driver > Yes .
2. Click Next > Yes > Next > Next .
3. Click Finish to restart the computer.
Video
1. Click 2.Install VGA Driver > Yes .
2. Click Next > Yes > Next > Next .
3. Click Finish to restart the computer.
LAN
1. Click 3.Install LAN Driver > Yes .
2. Click Install > Finish .
3. The network settings can now be configured.
ExpressCard/Card Reader
1. Click 4.Install Cardreader Driver > Yes .
2. Click Install > Finish .
Hotkey AP
1. Click 5.Install Hotkey AP > Yes .
2. Click Next > Next .
3. Click Finish > Finish to restart your computer.
USB 3.0
1. Click 6.Install USB 3.0 Driver > Yes .
2. Click Next .
3. Click the button to accept the license and then click
Next .
4. Click Next > Install .
5. Click Finish .
Intel MEI Driver
1. Click 7.Install MEI Driver > Yes .
2. Click Next > Yes > Next > Next .
3. Click Finish .
Audio
1. Click 8.Install Audio Driver > Yes .
2. Click Next .
3. Click Finish to restart the computer.

Driver Installation & Power
When installing drivers make sure your computer is
powered by the AC/DC adapter connected to a working
power source. Some drivers draw a significant amount
of power during the installation procedure, and if the re-
maining battery capacity is not adequate this may cause
the system to shut down and cause system problems
(note that there is no safety issue involved here, and the
battery will be rechargeable within 1 minute).