Clevo 5600D, Руководство по обслуживанию, Страница: 37 / 129

Disassembly
2 - 12 Removing the System Memory
2.Disassembly
Removing the System Memory
1. Remove the keyboard ( see page 2 - 11 ) .
2. Remove screws and ( Figure 2 - 6a ) from the shielding plate, and lift the plate up off the computer.
3. Locate the memory sockets and ( Figure 2 - 6c ), and gently pull latches and ( Figure 2 - 6c ) on the
memory socket toward the sides of the computer as indicated in Figure 2 - 6c .
4. The module ( Figure 2 - 6d ) will pop-up, and you can remove it.
5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Figure 2 - 6
Memory Removal
Sequence
a. Remove the screws
from the shielding
plate.
b. Remove the shield-
ing plate.
c. Pull the latch(es) on
the memory sockets
to release the mod-
ule(s).
d. When the module
pops up, lift it out.
1.Shielding plate
8. Memory module(s)
• 2 Screws
2 3 1
4 5 6 7
8
3
5
c.
d.
a.
2
4
6 7
6 7
8
1
b.
1
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perform-
ance.