![Clevo 5100S Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/clevo/5100s/5100s_service-manual_2623619016.webp)
13
D: Reinstall the heat sink
Note:
When reinstalling the heat sink, you will also have to replace the heat sink pad. A
heat sink pad can be obtained from your dealer.
1) Peel off the old heat sink pad and stick on a new one.
2) Insert the heat sink cable in the slot.
(Figure 4-3)
3) Align the 4 screw holes on the heat sink with those on the mainboard and screw them
in about half way. Once all the screws are in about half way and the heat sink is
seated probably tighten the screws.
Heat sink pad
E: Changing the SW1 DIP Switch settings
If you have installed the processor with Intel Speedstep you will have to change the
SW1 DIP Switch settings. Follow these steps to get to change the SW1 DIP Switch
setings:
1) Turn off the computer.
2) Press the two keyboard latches to elevate the keyboard from its normal position.
3) Carefully lift the keyboard assembly out to expose the
mainboard.
Содержание 5100S
