2
ENGLISH
Specifications
Connection:
433 MHz to Doorbell
Power:
5 V, 1 A USB-A outlet
General use
The Chime allows for a sound jingle or ringtone to be played when someone presses the
Clock-button on the Cleverio Doorbell. Ringtones can be changed between four sounds
and the volume can be adjusted.
Pairing
Start by connecting it to a USB outlet.
Via Cleverio Doorbell
1. Click the "RESET" button on the back of the Chime. The blue light will blink.
2. Press the doorbell button on the Doorbell, and the Chime will sound to react when
pairing is successful.
3. Once configuration is complete, the blinking blue light should change to a solid blue
light.
via app
1. Click the " " at the preview interface when you have added your doorbell to the app.
2. Click the "RESET" button on the back of the Chime. The blue light will blink.
3. Enter the "Settings" of your App, press "Bell Setting".
4. Press "Bind" button, the Doorbell will try to connect to the Chime.
5. Once connected you can change the ringtone and adjust the volume.
6. Once configuration is complete, the blinking blue light should change to a solid blue
light.
7. If the configuration fails, press the "RESET" button for 5 seconds to reset the Chime,
and then try again.
Safety information
Don't open or modify the device in any way, this should only be carried out by a qualified
technician due to the risk of electric shocks or short circuit. The mains plug is used as
the disconnect device, therefore the mains plug shall remain readily operable.
