Introduction:
Before installation please remove the Facia Trim Plate from around the front edge of the unit. This
can be refitted once the installation is finished and any decorating is completed.
The compact depth of the AVID2 unit will allow installation into standard UK 2-gang EO boxes, with
a minimum of 35mm depth.
These may be galvanised metal for installation in solid construction walls, plastic drylining (with
lugs) or may be installed into surface mounting Dado-type trunking systems using the appropriate
fixings.
Front Panel Controls and Connectivity:
Bluetooth connectivity is provided via a receiver allowing any Bluetooth enabled device using A2DP
profile to be paired with the AVID2. A blue LED provides indication of the Bluetooth function.
as follows:
Blink LED= Pairing Mode
Solid LED= Connected
See User Instructions for Bluetooth Connection Instructions
Two types of wired input are provided via the front panel; a Stereo 3.5mm Jack and Stereo Phono
Inputs; the Stereo 3.5mm Jack Input has a signal-operated priority over the Stereo Phono Inputs.
The Hi/Lo switch adjusts the input sensitivity from 1v (Line Level) to 200mv (average Headphone
output level), allowing the interface of generic MP3, CD and media players without loss of system
volume level.
3 illuminated buttons allow basic control of the AVID2, the bottom button ( ) controls the ON/OFF
function, the up/down buttons ( ) control Volume Up and Volume Down.
A clear LCD Display shows the desired volume level between 0 (no output) to 20 (maximum
output).
Fascia
Trim
Plate
Hi/Lo Line
Level
Sensitivity
Switch
IR
Receiver
Window
Stereo Phono
Inputs
Audio Level
Display
Volume
Level
Up
Volume
Level
Down
ON/OFF
Switch
3.5mm
Jack
Input
Bluetooth
LED Indicator
