◼
Ensure the receiver controller is connected to 110-
260VAC and power is ‘on’
◼
Press the function button for 3~5 seconds, (the indicator light will flicker slowly) then release the button, enter the
coding mode
◼
Press the "wireless switch" to be coded, the indicator flashes 2 times and emits the "beep" two times, at this time the
indicator lights out, indicating the coding success
◼
Repeat above steps to add multiple switches. The receiver can store up to 20 switch codes
◼
Repeat this process for each button on Double and Triple switch.
Note: Short press of function button will turn load on / off
Code matching
How to erase code
◼
Press the button for more than 6~7 seconds, the indicator quickly flashes 10 times and at the same time, the relay
performs the turn-on/off action quickly, this indicates all recorded codes have been deleted.
Press any button to
complete the code
Press button for 3
seconds to enter the
code mode
Indicator(red
)
