NPM Manual
Explanation of NPM 3000 series connection (NPM 4000/5000 series similar
)
emperature/humidity sensor;
: If control NPM via network, please connect to RJ45 port of PC or HUB, Router, Switch,
: If control NPM via local RS-232, connect to COM port of PC.
: NPM daisy chain cable, begin at master NPM unit, from LINK port to RS-232 port of next
NPM unit, the rest may be deduced by analogy.
4. Use of control software
4.1 NPM which connect to network
1
: T
2
etc.
3
4
Dummy connect method when NPM connect to Ethernet:
Picture 4.1-1 NPM connect to network
4.2. Explanation for using control softw re
o
a
After finished install hardware, install control software: Network Power Manage System
n PC. The following is explanation of control software: Network Power Manage System.
Page 9 of 28