Clever Choice Auto-Code Pro Скачать руководство пользователя страница 41

Страница: 41 / 48

Troubleshooting

1. If the meter does not display a message after inserting a test strip:

2. If the test does not start after applying the sample:

3. If the control solution testing result is out of range.

POSSIBLE CAUSE

WHAT TO DO

Battery exhausted.

Replace the battery.

Test strip inserted upside down or

incompletely.

Insert the test strip with contact bars

end first and facing up.

Defective meter or test strips.

Please contact customer services.

POSSIBLE CAUSE

WHAT TO DO

Insufficient blood sample.

Repeat the test using a new test

strip with larger volume of blood

sample.

Defective test strip.

Repeat the test with a new test strip.

Sample applied after automatically

shutoff (2 minutes after last user

action).

Repeat the test with a new test strip.
Apply sample only when flashing “ ”

appears on the display.

Defective meter.

Please contact customer services.

POSSIBLE CAUSE

WHAT TO DO

Error in performing the test.

Read instructions thoroughly and

repeat the test again.

Control solution vial was poorly

shaken.

Shake the control solution vigor-

ously and repeat the test again.

Expired or contaminated control

solution.

Check the expiration date of the

control solution.

Control solution that is too warm or

too cold.

Control solution, meter, and test

strips should be at room tempera-

ture (68°F-77°F/20°C-25°C) before

testing.

Defective test strip.

Repeat the test with a new test strip.

Meter malfunction.

Please contact customer services.

Содержание Auto-Code Pro

















































Результаты поиска

Содержание Auto-Code Pro

Отзывы:

Похожие инструкции для Auto-Code Pro

Бренды по названию

Популярные бренды

Clever Choice Auto-Code Pro, Руководство пользователя

Результаты поиска

Содержание Auto-Code Pro

Отзывы:

Похожие инструкции для Auto-Code Pro

Бренды по названию

Популярные бренды