4
(Note: Some of above function only can be used in Bluetooth mode only. In Aux mode,
you may need to control through your source device.)
INSTRUCTIONS FOR USE
Charging the speaker
For best results, fully charge the speaker before its first use.
1.
Connect the USB charging cord (included) to the DC 5V charging port of the
speaker and insert the other end into a port on your computer or similar power
source.
2.
The Red LED turns on indicating that the battery is being charged. Once it is fully
charged, the Red LED will turn off. It will take around 2-3 hours to fully charge
the battery.
Note: In order to have better battery life, please do not charge for over 4 hours.
Turn the speaker to Bluetooth pairing mode -
1.
Slide the Power ON/OFF switch to ON position.
2.
You would hear voice message “Bluetooth’s mode”; the speaker is now in pairing
mode.
(Note: Speaker automatically pairs with the previously paired devices)
Pairing your device with Bluetooth Speaker
–
Your
Bluetooth Speaker
can wirelessly stream audio from any Bluetooth enabled device
within the distance of 27-33 Feet. Simply follow the below steps.
1.
Slide the Power ON/OFF switch to ON position.
2.
You would hear voice message “Bluetooth mode”; speaker is now in pairing
mode.
3.
Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.
4.
It will search for various devices.
5.
The pairing name of our Bluetooth Speaker is “
BT Speaker
”, pair it with this
device.
6.
If required, enter the password ‘0000’ to confirm to finalize pairing.
7.
Once paired successfully, you would hear voice message “Bluetooth connected
successfully”.
8.
If you fail to pair it within the time frame or you want to pair it with a new device
please follows the steps outlined above.
Select your favorite song at the Bluetooth device and music would now stream through
Bluetooth speaker.
7
Micro SD (TF) Card
slot
Plays music from Micro SD (TF) Card (not included)