4
Identification:
1. 3-pin XLR mic input -
Use this socket to connect the supplied microphone
2. LED Output level meter -
Displays amplifier output level.
3. Zone selector buttons -
Use these button to select the desired zone
4. Talk LED -
When the talk button has been pressed the LED will light up.
5. Chime LED -
When the chime button has been pressed the LED will light up.
6. Chime button -
Use this button to activate the chime tone
7. Talk button -
Use this button activate the talk function
8. All call button -
Use this button to activate all 5 zones to page out to.
9. All call LED -
When All Call has been selected this LED will light up.
10. Zone LEDs -
These LEDs will light up according to which zone has been selected
11. DC 24V input -
This power input is only required if the mic is on 50m+ of cable
12. On/off power switch -
Use the switch to power the unit on or off
13. Communication port -
Use this socket to connect to the MA 240Z5 amplifier.
14. Chime volume control -
Use this control to increase or decrease the chime volume
15. Mic volume control -
Use this control to increase or decrease the mic volume
16. Master volume control -
Use this control to increase or decrease the master volume
17. 2/4 tone selector switch -
Use this switch to select between the two tone options.
0
10
0
10
0
10
OPTIONAL
POWER
24V DC
ON
OFF
CHIME VOL
OUTPUT TO ZONE AMPLIFIER
MASTER VOL
MIC VOL
CHIME
2 TONE
4 TONE
ZONE 1
ALL CALL
ZONE 2
ZONE 3
ZONE 4
ZONE 5
CHIME
TALK
-18 -15 -12 -9 -6
-3
0 +3 +6 PEAK
OUTPUT LEVEL
1
2
3
PUSH
1
2
3
1 - GND
2 - GND
3 - +24V DC
ON
OFF
PM 100 PAGING MICROPHONE
