www.cleveracoustics.co.uk
ZM8 Matrix Zone System
User Manual
14
Power Supply
The remote paging console is powered by the Matrix through the RJ45 communication port when the communication distance is less than 50m. An extra DC
24V power input is equipped on the back part of the paging consolle to supply power when the communication distance is greater
than 50m.
Connection between Remote Paging Console and Extension Keypad
The IDE communication cable is used to provide connection between the remote paging console and the extension keypad as well as between the two
extension keypads.
There are 4 address codes on both the remote paging console and the extension keypad which are used to identify these.
Please Note:
Only one address code switch of each dip switch can be placed in the downward position. If any of the dip switches are set at different addressed to those
shown above, the console will not operate.
Extension keypad remote paging console connection is made through the supplied 10P IDE cable. Once either two or three ZM8 PGC extension panels are
connected, the operation of paging announcements is the same as described previously for individual zone paging or all call actions.
Extension Keypad 1
Extension Keypad 2
Extension Keypad 3
Extension Keypag Dip Switch setting
Connection through
10 P IDE cable
Extension keypad
Remote paging console
Connections and settings
Connections and settings
