www.cleveracoustics.co.uk
BGS 20T Series Loudspeakers
User Manual
4
Installation instructions
Before attaching the loudspeaker, make sure that the installation
area can hold a minimum point load of 10 times the installations
weight. (eg 13kg - 130kg point load).
The durability of the installation depends very much on the
material used at the installation area (building material),
such as wood, concrete and brick etc. This is why the fixing
material must be chosen to suit the wall material.
Always ask a specialist for the correct plug/screw combination
indicating the maximum load and building material.
Step 1
Fix the mounting bracket to the wall
with 3 suitable plug/screw fixings.
The ball joint allows you to pivot
the loudspeaker around so you
can access the mounting bracket
for installation.
Step 2
After installation, pivot the
loudspeaker to select the
desired position.
At this point, connect the cable/s
observing connection polarity and
select the wattage tapping.
Step 3
Once you have selected the
desired position, use an Allen key
to tighten the screws on the base
of the loudspeaker.
This will secured the chosen
position and prevent movement
from the desired position.
