OPERATING and MAINTENANCE INSTRUCTIONS
Models: HCDH-20.20 Companion Holding Cabinet
Companion
Holding Cabinet
FL-2335-CLV
Rev. 0 (2/07)
Page 10 of 14
Cleveland Range, LLC
1333 East 179th Street
Cleveland, Ohio, 44110 U.S.A
The doors on the HCDH2020 & HCWH2020 are shipped with the hinges on the left side of the cabinet
as standard. The doors on the cabinet are large and may require additional help when changing the hinge
direction. Allow the cabinet to cool if the cabinet has been in use.
Remove handle bracket and strike plates from cabinet and set aside.
Remove hinge covers and set aside.
Remove hex screws from door gasket bracket assembly and door cover and set aside.
Remove door(s) from cabinet, rotate door(s) 180° and install onto other side of cabinet. For
dutch doors, install the bottom door onto the top position and install the top door onto the bottom
position on the other side of the cabinet.
Remove screws on bottom of (lower) door and install onto top of (upper) door.
Install door gasket assembly and door cover onto bottom of (lower) door.
For single door, remove latch and rotate 180° and install onto holes on upper half of door. For
dutch doors, it is not necessary to change latches.
Install handle bracket and strike plates onto other side of cabinet.
Adjust hinges, latch(es) and door gasket bracket assembly for proper door seal.
Install hinge covers.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
HOW TO REVERSE THE DOOR OPENING:
