Cleveland CycleWerks Tha Heist, Руководство пользователя, Страница: 26 / 34

23
GENERAL LUBRICATION
Proper lubrication is important for safe, smooth operation
and long life of your vehicle. Be sure that all lub rication is
performed during periodic maintenance on the vehicle. In-
crease number of intervals when you use your motorcycle in
severe conditions.
Your authorized service center should do
the general lub rication as shown in the Maintenance chart.
This includes the lubrication of wheel bearings , swing arm
bearings, steering shaft holder , cables, etc.
Lubr icate the following areas with oil or grease as indi-
cated.
•
Bottom fitting of steering shaft -- lubricate with lit hium (Li)
based grease
•
Brake cable
•
Throttle cable
•
Throttle grip
AIR FILTER MAINTENANCE
Check the air filter every oil change. The air filter should
be checked more frequently if you ride in conditions wh ere
there i s dirt, sand or other debris. The air filter can be
tapped out and lightly blown with air to clean.
Do not use compressed
air to clean the filter e leme nt. It will damage the filter.
TRANSPORTING
It is best to transfer the motorcycle in its normal operating
position.
•
Drain fuel from carburetor.
•
Turn fuel valve to the off position.
•
Turn off the engine .
•
Place a suitable container beneath the carburetor drain
screw.
•
Loosen the screw and allow the fuel from the carburetor
to drain completely.
•
Retighten the carburetor drain screw.
•
Lock the parking brake lever.
•
Securely tie down the motorcycle at the four wheels with
straps
, rope , or some other suitable means. Use extra
tie downs if you transfer the vehicle in the standing posi-
tion.