1. Empty Calibration
Advance the
front wheels
only
of the
Empty
truck (with full
fuel) onto the weighbridge.
Record steering tare (Empty) weight:
exp. 9000
lbs.
Next move entire truck onto the weighbridge.
Record
total Empty
weight:
exp. 25000
lbs
Subtract steering (A) empty weight from total Empty weight
to obtain drive axle Empty weight :
exp. 25000
– 9000 = 16000
Drive axle Empty weight =
16000
lbs.
Now it‟s time to enter the Empty weights
To enter the Empty weights:
A = Steering
B = Drivers
Calibration
EMPTY
FULL
1. Press
CAL
key and a
flashing
“Empty” will
appear.
2. Press
CAL
key again; a
flashing “A” will appear.
3. Press & hold Up or Down
arrow to reach the desired
“Empty” weight of “A” axle
group (steering axle).
4. Press
CAL
key to move to
the “B” axle group (rear
drivers) “B” will begin
flashing.
5. Press & hold Up or Down
arrow to reach the desired
“Empty” weight of “B” axle
group (rear drivers).
6. Press
CAL
key. You are
done entering your
“Empty” weights.
EMPTY T: 9000
A: 9000
B
:
16000
T : 00
A
: 9000 B: 0