6
Diverting
(head shower / hand shower)
Diagnostic
Press & hold
knob 1 until LED color ring is
flashing ORANGE. Release knob
immediately. Start Diagnostic:
Water fl ows:
− Device is broken, contact Support Center.
No warm water is fl owing:
−
Check the hot water supply line
−
Is hot water supply line open?
−
Is hot water system activated?
−
Is mesh
fi
lter ok?
−
Are cold and warm water supply lines
correctly connected?
Press 1 ×
knob 1: Water ON
Press 1 ×
knob 2: Diverting
between hand shower
<>
head
shower
Activating the cleaning mode
Press & hold
knob 1 until LED color ring is
fl
ashing GREEN. Release knob immediately.
Press & hold
knob 1 until LED color ring
GREEN goes out or wait 45 seconds
(automatic reactivation).
Deactivate Interface
1. LED color ring is illuminating RED:
Check if hot water
fl
ows.
2. LED color ring is illuminating GREEN:
Check if NO water fl ows.
Reactivate Interface
Scalding protection
Turning
knob 1: Changing temperature.
From
≥
38° C temperature increase in smaller
increments (more wheel turns).
3. LED color ring is illuminating BLUE:
Check if cold water
fl
ows.
No cold water is fl owing:
− Check cold water supply line
− Is cold water stop valve opened?
− Is mesh fi lter ok?
− Are cold and warm water supply lines
correctly connected?
Diagnostic completed:
Flashing 2 × ORANGE:
Diagnostic successfully completed.
Flashing 3 × ORANGE:
Malfunction of the temperature sensors.
Contact Support Center.
