ZigBee command of door lock – User Manual
UM_ZXPAND_20110919_001_01_00
CLEODE Page 10 sur 14
III.2 S
TARTING UP
ZXPAND
In the switched on of the object, it tries to
join during about seconds and flashes
twice.
If a coordinator is present and what it
authorizes the ZXPAND to join the
network, the light of the ZXPAND flashing
during 2 seconds then turn off.
In the cases where the association is not possible, the object is going to put itself in sleep and
to try automatically to join at the end of 15 minutes. This time will increase twofold in every
new failure of the association.
III.3 R
ESTART OF THE ASSOCIATION PHASE
If the
ZXPAND is not associated, the user can ask him at any time to join a network.
For this, the user has to press during 3
seconds on the button.
