Cleode ZHUM, Руководство пользователя

Страница: 9 / 17

ZHUM – User Manual
UM_ZHUM_20140422_001_01_00.doc CLEODE Page 9 of 17
Attribute Attribute ID
AlarmCount 0x0000

Temperature measurement cluster:
This cluster is used to configure the measurement of temperature, and reporting
temperature measurements.
Attribute Attribute ID
MeasuredValue 0x0000
MinMeasuredValue 0x0001
MaxMeasuredValue 0x0002
Tolerance 0x0003
Among the attributes of the cluster TemperatureMeasurement the attribute MeasuredValue
transmits its value as follows:

Every hour if the temperature does not change by more than 1 ° C

After 2 minutes if the temperature has changed by more than 1 ° C
Configuration settings report (min time, max time, temperature change report) is fully
configurable by the user.
MeasuredValue : temperature measured in °C * 100.

Relative humidity measurement cluster:
This cluster is used to configure the measurement of humidity, and reporting humidity
measurements.
Attribute Attribute ID
MeasuredValue 0x0000
MinMeasuredValue 0x0001
MaxMeasuredValue 0x0002
Tolerance 0x0003
Among the attributes of the cluster Relative humidity measurement, the MeasuredValue
attribute transmits its value follows:

All hours if moisture does not move more than 1%

After 2 minutes if the temperature has changed by more than 1%
Configuration settings report (min time, max time, temperature change report) is fully
configurable by the user
MeasuredValue : humidity measured % * 100.