Clenergy 4X11, Руководство по установке

Страница: 5 / 15

Installation Guide_PV-ezRack Ascent-V1.1 (June 2021) 04 page of 12
Clenergy China
999-1009 Min'an Rd, Huoju Hi-tech Ind. Dev. Zone
Xiang'an District 361101, Xiamen, Fujian, China
T
：
+86 592 311 0088
F
：
+86 592 599 5028
E
：
sales@clenergy.com.cn
3.2.2 Safe Torques
Please refer to safe torques defined in this guide as shown below. If power tools are required, Clenergy recommends
the use of low speed only. High speed and impact drivers increase the risk of bolt galling (deadlock). If deadlock
occurs and you need to cut fasteners, please make sure that there is no load on the fastener before you cut it. Avoid
damaging the anodized or galvanized surfaces.
System Overview