Installation and use
WARNING
FOR THE CORRECT USE OF THE COLLECTION CONTAINER, READ THE INSTRUCTIONS IN THE USER
MANUAL SUPPLIED WITH THE DEVICE.
THE LIQUIDS COLLECTED MUST ONLY BE DRAINED OUT IN AREAS ASSIGNED TO THE DISPOSAL OF
HOSPITAL WASTE AND/OR STRICTLY FOLLOWING THE INSTRUCTIONS OF THE AUTHORITIES FOR THE
TREATMENT OF THESE PRODUCTS.
Cleaning and disposal
•
Clean the device every day or in accordance with the hospital routine
•
Clean or replace the sintered bronze filter (6) if necessary.
•
Carefully clean all the external surfaces of the device using a soft damp cotton cloth rinsed in neutral detergent
diluted 10% in water.
CAUTION
DO NOT USE SOLVENTS OR ABRASIVE PRODUCTS FOR CLEANING: THESE CAN SERIOUSLY DAMAGE
THE SURFACES OF THE EQUIPMENT AND THE PLASTIC PARTS.
•
DO NOT IMMERSE THE UNIT IN DISINFECTANT;
•
DO NOT PLACE THE UNIT IN AN AUTOCLAVE;
•
DO NOT USE INFLAMMABLE PRODUCTS.
IF THE EQUIPMENT IS ACCIDENTALLY CONTAMINATED BY SUCTIONED LIQUIDS, IT MUST BE ISOLATED
AND THE NECESSARY CLEANING AND DISINFECTION OPERATIONS MUST BE CARRIED OUT BY
QUALIFIED PERSONNEL.
IF NECESSARY, STERILISE THE VENTURI NOZZLE WITH A VALIDATED ETHYLENE OXIDE
STERILIZATION CYCLE (E.G. 14% EO 12 H. / 50 KPA / 37 °C).
CAUTION FOR DISPOSAL
IF THE DEVICE IS DAMAGED AND CANNOT BE REPAIRED, DISPOSE AND DISCARD IT ACCORDING TO
THE INTERNAL PROCEDURES OF THE HOSPITAL. DO NOT RECYCLE OR REUSE ANY COMPONENT.
Technical features
Sales description ..................................................
Dimensions (mm) ..................................................
Weight (g) .............................................................
Scale of the vacuum gauge ...................................
Maximum suction flow ...........................................
Maximum supply depression .................................
Vacuum supply connection ...................................
Vacuum connector ................................................
Storage conditions ................................................
Operating conditions .............................................
Direct suction nozzle
Height: 195
Width: 68
Depth: 48
400
From 0 to -100 kPa graduated at 5 kPa
From 0 to -760 mm Hg graduated at 20 mm Hg
60 L/min ± 5 L/min at -98 kPa
-98 kPa
Thread M8x1 F
Hose connector Ø 10÷12mm
-40 °C ± 2 °C / +60 °C ± 5 °C and 40% to 70%
RH
+5 °C ± 2 °C / +35 °C ± 5 °C
Page 4
