20
6
Operation
6.1
Before you start
1.
Check the i-move 2.5B® for damage or defects.
2.
Make sure that the dust bag is placed in the i-move 2.5B.
3.
Make sure you have the correct tool for the intended purpose.
4.
Check the brush from the tool for wear and tear.
5.
Check the motor filter. See section 7.2.2.
6.1.1
Height adjustment
Pull the collar (Figure 11, pos 1) on the wand up
to unlock it, adjust the length of the wand and
release collar to lock it.
Figure 11
6.1.2
Insert the battery
1.
Insert the battery (Figure 12, pos 1) in the
slot (Figure 12, pos 2), until you hear a
"click". The battery is now fixated. Repeat
this for the second battery.
Figure 12
