Clemas & Co DEMON HURRICANE, Руководство оператора

Страница: 8 / 36

PREPARATION
Water Supply:
A Ensure there is an adequate water supply either from the mains or a reservoir.
B Attach water supply hoses to suitable tap or immerse the suction hose with approved suc ‐
tion filter into the reservoir.
NOTE: ONLY CLEAN WATER SHOULD BE USED. THE PUMP MAY BE DAMAGED IF DIRTY OR
CONTAMINATED WATER IS ALLOWED TO PASS THROUGH THE PUMP.
Hoses: Low pressure inlet.
For models up to 13 litres per minute use ½ “ bore suction hose or feed pipe.
For models from 13 litres to 24 litres per minute use ¾” bore suction hose or feed pipe.
Hoses:High pressure outlet.
For all models use 3/8” RIT or 3/8” R2T hoses.
A Check the condition of the “O” rings in the ends of the hose.
B Attatch the high pressure hose to the pump connection.
C Attatch the spray gun to opposite ends of the high pressure hose.
OPERATION
A Turn on the water supply.
B Start the engine
C Direct lance on to surface to be cleaned. Press the lance trigger.