background image

 

 

14 

MAINTENANCE SCHEDULE 

 

During the cleaning and the maintenance of the machine remove the key. 

 

DAILY 

o

 

Clean the recovery tank and the filter of the vacuum motors.  

WEEKLY 

o

 

Check for the cleaning of the suction pipes and of the squeegee  

o

 

Check the state of the rubber squeegee blades  

MONTHLY 

o

 

Check the filter of the clean water tank 

EACH YEAR 

o

 

Check the brush state of each motor 

AFTER TWO YEARS 

o

 

Check safety systems 

Check electric installation  
 

SQUEEGEE BLADE REPLACEMENTS

 

The squeegee blades should be replaced when the contact edge becomes worn; the perfection of the 
edge is essential for a perfect drying. To replace the blades 
 

o

 

The squeegee should be demounted from the machine and placed on the desk. 

o

 

Now, remove the screws (fig) both on the front part and on the rear part of the squeegee, the 
steel  straps and remove worn rubber blades 

o

 

Perform the inverse procedure and assemble the new blades, then adjust the squeegee. 

 

 

 

Fig. 6 

 

 

 
 
 
 
 
 
 

1.

 

squeegee front blade 

2.

 

squeegee body 

3.

 

squeegee rear blade 

4.

 

squeegeecounterblade 

5.

 

squeegee straps 

Содержание C50 43B

















Отзывы: