12
Step 8
Center car seat in the vehicle seating position
chosen, and tighten vehicle belt to secure the
car seat.
• Press down in center of car seat to
depress the vehicle cushion and pull
down on lap portion of inflatable vehicle
belt to remove excess slack, as shown in
Figure 17.
• Check that Forward-Facing Belt Lock-off
is all the way open with Lock-tab rotated
completely down and as close to the
back metal support bar as possible, as
shown in
Figure 18
.
IMPORTANT:
NEVER lock or partially close
Forward-Facing Belt Lock-off when using an
inflatable vehicle belt.
IMPORTANT:
The lap portion of the inflatable
lap/shoulder belt MUST remain tight and not
lengthen when pressure is released from the
seat. If the lap portion of the inflatable lap/
shoulder belt does not remain tight, go back
to Step 7 and refer to your vehicle manual.
Step 9
Check that the entire belt is laying flat,
placed correctly through both red Forward-
Facing Belt Guides and NOT between the
Harness and seat, as shown in
Figure 19
.
Figure 18
Figure 17
Figure 19
Figure 92
Figure 93
