Apex Tool Group
P2544PM | 2021-02
17
3
EN
3.6
FastApps menu
The FastApps menu is used to parameterize FastApps.
In the mPro mode, the FastApps menu has no function.
Fig. 3-6: Menu – FastApps menu
Button
Description
FastApps mode is activated.
→
mPro mode is disabled.
FastApps mode is disabled.
→
mPro mode is active.
Only the parameters for the selected mode apply. If the mode is changed, the current
settings will not be carried over to the new mode.
Display of the currently selected FastApp.
Up to ten FastApps can be programmed. The number on the button indicates which
FastApp is selected.
FastApp mit Drehmoment-Abschaltung.
Die Zahl rechts neben dem Symbol zeigt das
Abschaltdrehmoment
an. Die Einheit ent-
spricht der Auswahl, siehe 3.7.5 Selecting the torque units, page 25..
FastApp with angle shutoff.
The number to the right of the symbol indicates the shut-off angle.
Batch display
Display of the selected direction of rotation.
Depending on the selected direction of rotation, one of the two symbols is displayed.
Start speed display.
1
10
231
rpm
°
325
1
