16
P1959E/INT 2015-06
2069b_1_5_en_bedingt.fm, 28.07.2015
Product description
2
EN
2
Product description
2.1
General description
•
Automatic identification of connected battery.
•
Automatic identification of a charged battery guarantees optimum charging results.
•
Automatic identification of a defective battery.
•
The recharging phase guarantees maximum run time of the battery.
•
Charge status display
•
Overcharge protection
•
Wide-range input make worldwide use possible.
•
Voltage monitor prevents deep discharging and battery short-circuits.
2.2
Display
3
Initial operation
Once the battery is plugged in, the red
Charge
LED lights up,indicating that charging is in process.
When charging is finished, the charger automatically shuts off the charging process. The red
Charge
LED
lights up permanently.
LED
Operating status
Result
Power
Continuous green light
Power supply connected
Charge
Continuous red light
Battery is charged
Charge
Continuous red light off
No battery found
Charge
Flashing red light (1 Hz)
Battery being charged
Charge
Flashing red light (0,5 Hz)
Defective or deep-discharged battery
WARNING!
Risk of explosion if other batteries are used
Use only to charge CLECO lithium ion batteries, order no. 935377.
Never use to charge other battery types.
Connect the charger to the power supply:
The green
Power
LED indicates that the power
supply is connected.
Plug the battery into the charger and ensure
that it is securely connected.
The red
Charge
LED must not light up before the battery is plugged in.
When changing a battery, it may be necessary to wait a few seconds until the light goes out.
