Battery Charger
4
P1947E/EN 2015-07
1947b_1_5 en.fm, 21.07.2015
1.3
Basic requirements for safe working practices
1.4
Designated use
•
The charger is intended exclusively for charging Apex Tool Group lithium ion batteries, order no.
935377.
2
Items supplied / Transport
Check shipment for transit damage and ensure that all items have been supplied:
1
Battery charger
1
EU power cable
1
Operating instructions
Transport and store the charger in the original packaging. The packaging can be recycled.
3
Product description
3.1
General description
•
Automatically detection of
-
battery connected.
-
charged battery guarantees optimum charge results.
-
defect battery.
•
Optical display of charge state
•
Fault display:
-
Maximum charge time exceeded
-
Battery short-circuit
•
Automatic transition to conservation charging after full charging
guarantees maximum battery operating time.
•
Voltage monitoring prevents overdischarging or battery short-circuiting
CAUTION!
Electrical safety
Do not operate the charger if the housing, power cable or plug are damaged.
Do not use batteries which have been damaged or modified in any way. Batteries which have been
damaged or modified may respond unpredictably, causing fire, explosion or injury.
Do not open the charger.
Do not modify the charger structurally.
Operate the charger in dry, enclosed rooms only.
Protect the charger from moisture and rain.
Never operate the charger under unsuitable ambient conditions (i.e. where combustible gases, solvents,
dust, vapors or moisture is present).
Workstation
Ensure that there is enough space at the workstation.
Keep the work area clean and dry.