Cleco 7PTHD Series, Инструкция по эксплуатации

Страница: 9 / 38

81b_1_5 en bedingt.fm, 18.08.2008
P1880E/EN 2008-08 9
Before initial operation
4
4 Before initial operation
4.1 Ambient conditions
4.2 Air supply
➔
The inside of the air hose must be free of residue; clean it if necessary.
➔
Spray a few drops of oil into the air inlet tube.
Oils according DIN 51524 / ISO 3498
4.3 Changing air inlet: top / buttom (7PTHDA only)
At delivery the air inlet at the buttom is sealed with a screwed plug. If a change is required,
change following:
➔
Remove air strainer from the top (and store it) see 8.2 Pistol grip 7PTHDA…, page 28,
detail X.
➔
Remove screwed plug from the buttom, thereby holding fast A/F 17.
➔
Screw screwed plug into air inlet at the top see demand.
Ambient temperature 41 °F (5 °C) to a maximum of +104 °F (+40 °C)
Permissible relative humidity 25 to 90 %, non-condensing
Parameter Data
Air hose Inner diameter 3/8" (ø 9.5 mm), maximum length
16' 4.85" (5 m)
Working pressure range 58 to 101.5 psi (400 to 700 kPa)
Recommended: 90 psi (620 kPa)
Compressed air Air quality according to ISO 8573-1, quality class 2.4.3
The compressed air must be clean and dry.
NOTE
To attain consistent results, maintain a constant working pressure using a 3/8" service unit con-
sisting of filter, pressure regulator and lubricator.
Order no. Packaging
unit
Liter
Standard
designator
ARAL BP elf ESSO INA Mobil Klüber SHELL
933090 2 HL32
Aralub
EE 100
Energol
HL 32
Polyelis 32
Olna 32
Nuto
H 32 Hydraol
A 32
D.T.E.Oil Light
Vactra Oil Light
Crukolan 32
Molina 32
Molina 22