Page 6
PL12EN-48EA
08/06/2015
Cleco
®
Product Information
The original language of this manual is English.
Product Safety Information:
Intended Use:
These DC electric tools are intended for tightening of
threaded joints or running down fasteners. Use only for
their designated purpose. Do not use in any improper
manner that could cause damage to the tool or injure
the operator.
For additional product safety information refer to Apex
Tool Group, LLC or Apex Tool Group GmbH & Co. OHG
document CE-2002, General Safety Instructions Electric
Assembly Tools.
These DC electric assembly tools must not be modified
in any manner unless approved in writing by Apex Tool
Group, LLC or Apex Tool Group GmbH & Co. OHG. All
safety devices must be properly installed and maintained
in good working order. Abuse, misuse, or failure to obey
this and any other issued warnings may result if injury
or death.
EC Declaration of Conformity:
We affirm that the product specified herein is to be
considered a machine in conjunction with a fastening
control from Apex Tool Group. We further declare that
this machine is in accordance with the following EC
Regulations, 2006/42/EC and 2004/108/EC. Applied
harmonized standards are ISO 12100:2010.
The name, job function and address of the person
authorized to compile the technical file.
Mr. Vishnu Irigireddy
Director of Global R&D- Mechanical Engineering
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
_______________________
Signature: Vishnu Irigireddy
Date: March 24, 2015
Noise and Vibration:
48EA Series: Noise Level ≤ 68 dB(A)
48EAE Series: Noise Level ≤ 68 dB(A)
48EA Series: Vibration < 2.5 m/s
2
48EAE Series: Vibration < 2.5 m/s
2
Service and Repair:
Tool service and repair should be performed by an
authorized Apex Tool Group, LLC or Apex Tool Group
GmbH & Co. OHG Center. Refer to the last page of this
manual for locations.
Disposal:
Observe local disposal guidelines for all
components of this tool and its packaging.
Copyright Protection:
Apex Tool Group, LLC or Apex Tool Group GmbH &
Co. OHG reserves the right to modify, supplement or
improve this document or the product without prior
notice. This document may not be reproduced in any
way, shape or form, in full or parts thereof, or copied to
another natural or machine readable language or to a
data carrier, whether electronic, mechanical, optical or
otherwise without the express permission of Apex Tool
Group, LLC or Apex Tool Group GmbH & Co. OHG.
Gearing and angle head grease:
For proper function and long service life, use of the
correct grease is essential.
WARNING
Part No.
Packaged
Designation
544076
2 oz. (0.06 kg)
Molytex EP2
544077
16 oz. (0.45 kg)
Molytex EP2
540395
2 oz. (0.06 kg)
Magnalube-G
513156
16 oz. (0.45 kg)
Magnalube-G
541444
2 oz. (0.06 kg)
Rheolube 363AX-1
541445
16 oz. (0.45 kg)
Rheolube 363AX-1
